• Battery Capacity
• Battery Voltage
• Battery Current (Amps)
• Battery State of Charge (SOC)
• Battery State of Health (SOH)
• Battery Status
• Individual Cell Voltage
• Battery Temperature
• Battery Cycles
• Battery Alarms
• Battery Event Information

Industry Leading Warranty

5 Year Product Warranty & Lifetime Technical Support . They also promote a track record of near perfect resolve - Purchase any Enerdrive Product with peace of mind your covered by a company at the forefront of lithium battery systems in Australia.

Key Specifications

• Available Capacity: 200Ah
• Nominal Voltage 12.8V
• Cycle Life (DOD – 80% under controlled conditions)
• Normal Charge Voltage CV/CC 14.40 ̴ 14.60V
• Standby (Float) Voltage 13.50 ̴ 13.80V
• Discharge Cut-off Voltage ≤11.20V
• Self-discharge Rate ≤ 3% Per Month
• Dimensions: 505mm x 173mm x 265mm
• Weight: 25kg

Enerdrive 12v DC2DC40+ DC-DC Battery Charger / MPPT Solar Regulator

The Enerdrive ePOWER DC2DC+ Battery Charger is a fully automatic multistage, multi input battery charger with the ability to charge from either an alternator linked to a battery; or via solar power with the in built Maximum Power Point Tracking (MPPT) Solar Controller. With two inputs available, the main/house battery will be charged from either the engine while underway, or via the solar panels when stationary. The process to choose either engine or solar is fully automatic and both functions are controlled from within the unit itself without the need for external relays. Profiles to charge GEL, AGM, Flooded, Lithium and even full custom profiles are included

Features

• Two totally independent DC Inputs for both engine and solar regulation charging one house battery bank output
• DC M6 screw terminals that will allow for large battery cable connection between all sources
• A dedicated Maximum Power Point (MPPT) solar regulator
• The same battery algorithms as included in our AC mains ePOWER battery charger.
• GEL, AGM, Flooded, Lithium and the ability to create a full custom profile
• Vehicle input allows for either 12 or 24v and a maximum solar input of 45V/800W
• 40A output up to 40+°C with thermo controlled fan cooling
• Fully programmable LCD display to show which source is charging the battery along with charger status, voltage and amperage
• Temperature sensor included in charger for more accurate battery charging

EN3DC40+ Specifications

• Output Voltage: 12V Nominal (8.0V min)
• Output Current: (Maximum) 40A ~ 50A
• Output Power:  775W
• Selectable Battery Type: Gel, AGM, Flooded, Lithium, Program
• Charger Voltage Range:  13.8V – 15.5V
• Float Voltage Range:  13.0V – 13.8V
• Charger Current:  (User Selectable) 5/10/15/20/25/30/35/40/45/50A (default 40A)
• Equalise Voltage:  (Flooded Battery) 15.5V
• Equalise Charging Current:  10% of Bulk Current Setting
• Charging Control:  2 stage / 3 stage selectable (Default 3 stage)
• DC Output Bank:  Single (non isolated)
• Current draw from CH1 when not in use:  < 50mA
• Battery Temperature Setting:  Low/ Normal/ High (Battery Temperature Sensor Standard)
• Efficiency:  95%
• INPUT Rating:  (CH2 – MPPT Solar)
• Input Voltage:  14.5 – 45VOC
• Maximum Input: ≤ 23V input, 500W (600W allowable) ≥37.5V-45V input, 750W (800W allowable)
• INPUT Rating:  (CH3 – Start/Alternator)
• Input Voltage:  10.5 – 16VDC / 21 – 32VDC
• Dimensions: 242mm (L) x 172mm (W) x 74mm (H)
• Unit Weight 1.85 Kg