Enerdrive B-TEC 12V 125ah G2 Battery + DC-DC Charger 40A Bundle

Bundle contains the following items:

ePOWER B-TEC 12v 125Ah Lithium Battery Gen2
ePOWER 12v DC2DC40+ DC-DC Battery Charger

NEW Generation 2 Model - B-TECH 125ah 12V Lithium Battery from Enerdrive sees further design & functionality improvements, an industry leading 5 year warranty and handy purpose built battery tray & strap included with each battery.

Smart Phone Monitoring System

The Bluetooth Wireless Battery Monitoring feature carries over to the whole B-TECH G2 Range, so you can monitor the following via your smartphone or tablet (Android & Apple Compatible)

Battery Voltage
Battery Current (Amps
Battery State of Charge (SOC)
Battery State of Health (SOH)
Battery Status
Individual Cell Voltage
Battery Temperature
Battery Cycles
Battery Alarms
Battery Event Information

Built-In Reset Button

A KEY improvement and a brand NEW features for the Enerdrive B-Tech G2 LIthium Battery range is the “Built-In Reset Button” making re-starting a flat battery a breeze. No longer do you need to apply a voltage to the battery terminals to wake up the battery. Press the button and within seconds, the battery will come back to life ready to accept a charge source to rejuvenate the battery.

Battery Management System

The other battery specifications remain relatively the same; battery weight, battery dimensions, max charge & discharge rates. The Prismatic Cell Design & Battery Management System (BMS) with Active Cell Balancing appears equal to the previous version. For those that don't know, the internal Battery Management System ensures safe and accurate operation of the battery. It monitors and optimises each Prismatic cell within the battery during normal operation. It will also protect the battery pack from over charge, over discharge, over temperature & short circuit.

Industry Leading Warranty

5 Year Product Warranty & Lifetime Technical Support . They also promote a track record of near perfect resolve - Purchase any Enerdrive Product with peace of mind your covered by a company at the forefront of lithium battery systems in Australia.

EPL-125BT-12V G2 Specifications:

Amp Hours: (Ah) 125.0
Dimensions: 318mm (L) x 165mm (W) x 232mm (H)
Weight 15kg
Battery Voltage: 12V
Nominal Voltage: 12.8V
Nominal Capacity: 125Ah
Cycle Life: (DOD - 80% under controlled conditions) ≥ 2000 Cycles
Battery Charge Temperature: 0 - 45°C
Normal Charge Voltage: CV/CC* 14.20 - 14.60V
Standby (Float) Voltage: 13.50 - 13.80V
Maximum Charge Current: 60A @ 25°C for 30mins
Recommended Charge Current for Maximum Life: ≤ 20-60A
Battery Discharge Temperature: -20 ̴ 60°C
Battery Output Voltage Range: 11.00 - 14.60V
Maximum Discharge Current: 100A @ 25°C ± 5°C for 30mins
Pulse Discharge Current: 450A for 1.0s
Discharge Cut-off Voltage: ≤11.20V
Battery Manual Reset Button: Yes
Discharge Over Current: 110A for 30s – 450A for 1s
Protection Reset Time: Approx 10s Auto Release
Over Current Release Method: Disconnect Load
Battery Discharge Over Temp: Protection to 65°C ± 5°C Release at 50°C ± 5°C
Battery Charge Over Temp: Protection to 55°C ± 5°C Release at 45°C ± 5°C
Short Circuit Protection: Auto release after 5s
Self Discharge: ≤ 3% Per Month

Enerdrive 12v DC2DC40+ DC-DC Battery Charger / MPPT Solar Regulator

The Enerdrive ePOWER DC2DC+ Battery Charger is a fully automatic multistage, multi input battery charger with the ability to charge from either an alternator linked to a battery; or via solar power with the in built Maximum Power Point Tracking (MPPT) Solar Controller. With two inputs available, the main/house battery will be charged from either the engine while underway, or via the solar panels when stationary. The process to choose either engine or solar is fully automatic and both functions are controlled from within the unit itself without the need for external relays. Profiles to charge GEL, AGM, Flooded, Lithium and even full custom profiles are included

Features

Two totally independent DC Inputs for both engine and solar regulation charging one house battery bank output
DC M6 screw terminals that will allow for large battery cable connection between all sources
A dedicated Maximum Power Point (MPPT) solar regulator
The same battery algorithms as included in our AC mains ePOWER battery charger.
GEL, AGM, Flooded, Lithium and the ability to create a full custom profile
Vehicle input allows for either 12 or 24v and a maximum solar input of 45V/800W
40A output up to 40+°C with thermo controlled fan cooling
Fully programmable LCD display to show which source is charging the battery along with charger status, voltage and amperage
Temperature sensor included in charger for more accurate battery charging

EN3DC40+ Specifications

Output Voltage: 12V Nominal (8.0V min)
Output Current: (Maximum) 40A ~ 50A
Output Power: 775W
Selectable Battery Type: Gel, AGM, Flooded, Lithium, Program
Charger Voltage Range: 13.8V – 15.5V
Float Voltage Range: 13.0V – 13.8V
Charger Current: (User Selectable) 5/10/15/20/25/30/35/40/45/50A (default 40A)
Equalise Voltage: (Flooded Battery) 15.5V
Equalise Charging Current: 10% of Bulk Current Setting
Charging Control: 2 stage / 3 stage selectable (Default 3 stage)
DC Output Bank: Single (non isolated)
Current draw from CH1 when not in use: < 50mA
Battery Temperature Setting: Low/ Normal/ High (Battery Temperature Sensor Standard)
Efficiency: 95%
INPUT Rating: (CH2 – MPPT Solar)
Input Voltage: 14.5 – 45VOC
Maximum Input: ≤ 23V input, 500W (600W allowable) ≥37.5V-45V input, 750W (800W allowable)
INPUT Rating: (CH3 – Start/Alternator)
Input Voltage: 10.5 – 16VDC / 21 – 32VDC
Dimensions: 242mm (L) x 172mm (W) x 74mm (H)
Unit Weight 1.85 Kg

Enerdrive ePOWER B-TEC 12V 125Ah G2 Lithium Battery + DC2DC 40A Charger